|
|||||||
| General Tips Tips about safety riding and other general tips. |
![]() |
|
|
LinkBack | Thread Tools |
|
#1
|
||||
|
||||
|
Oil In The Air Cleaner
HD Tech Bulletin
November 6, 2000 TC-88 Oil Pump Alignment It has been observed that some TC-88 engines are experiencing oil in the air cleaner when the vehicle is driven at high speeds. The correction for this condition is to align the oil pump. This is accomplished using the Evo2 tappet block alignment screws, Part Number HD-33443. The procedure is as follows: 1. Loosen all pump assembly mounting screws. 2. Remove two screws diagonal to each other. 3. Install the tappet block alignment screws in these two positions. 4. Torque the remaining screws to spec.. 5. Remove the alignment screws/tools. 6. Install the previously removed screws and torque them to spec.. |
![]() |
| Bookmarks |
| Tags |
| air, cleaner, oil, the |
| Thread Tools | |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| derby cvr into air cleaner. w/ finnished pics | harleymanjay | Fuel/Carb Related | 9 | 12-07-2008 04:07 PM |
| Install an Arlen Ness Big Sucker | chopper | Fuel/Carb Related | 6 | 01-26-2008 09:33 PM |
| Vacuum cleaner salesman | Cerberus | Humor | 0 | 12-08-2007 12:39 PM |
| Sportster CV Carb Rejetting | chopper | Fuel/Carb Related | 0 | 07-01-2007 08:22 PM |