Electra Glide Ignition Lock Removal

[chopper]

1. Turn the ignition KEY to unlock and leave the key inserted in lock assembly

2. Move ignition assembly to the "Off" position to unlock the forks. LEAVE THE KEY IN LOCK

3. Turn the Handlebars all the way to the right

4. With the ignition key still in the lock turn the LOCK ASSEMBLY to "Access"

5. Standing on the left side of the bike look at the lower left underside of the LOCK ASSEMBLY. You will see a small button in the rear left corner

6. Use a small screwdriver to depress the button and hold while pushing down on the KEY and turning it 60 degrees in the clockwise direction

7. Lift and remove knob

8. Reverse to reinstall except there is no need to depress the button



Here's another page on changing the bars which also covers the lock removal with pics too.

asd / DSCF0095.JPG